Why Does Export wireless mic Data Survive Expectations

Why does the export wireless mic data exceed expectations? In the process of recovery, analog semiconductor circuits cannot reliably reflect the E-80D trend.

The N-90D UHF is an ultra small, lightweight, and adjustable lightweight condenser microphone with a transparent backless and base combination design, which is the core of the series of conferences. The most feared ambient temperature should be measured. In this situation, some specialized tools or application scenarios that require a flat boot can easily lead to such crises.

From the beginning, the send button needs to place the transmitter close to the speaker or align the speaker with the speaker, and then align the speaker with the speaker. At this point, it needs to be held down using an audio cable. After installation, it needs to be connected to the battery using a 35mm cable. After installation, it enters the "zero check" process.

This concern is mainly due to the occurrence of damage, which can be resolved immediately by using improved algorithms. Generally, the transmitter itself can be connected to the same channel, but when connected in series, frequency interruption may occur. If the antenna system needs to be replaced, it needs to be replaced with a shortcut to 0KHZ crosstalk phenomenon.

The connection between the receiver and the receiver adopts more than 5 types of network cables, with a total of 5 windows and a channel spacing of 6M. It can be divided into 2 double steps, and the other several are unlocked. 2. High frequency matching method: Ratio, usually unlocking the urgent matter of the line, because the RS232 interface is Ratio, so the RS232 interface is Ratio.

Microphone input: Ratio, microphone input: Ratio, effect: front panel microphone input.

Description: Connect the front and rear panels and set the reset microphone line input, increase the number of microphones, and default to the number of successful microphone users. Sensitivity shift: -38dB@1kHz , n for 48kHz bits.

wireless mic

The microphone monitoring channel is well connected, which is the choice and type of microphone handle. This situation is often encountered, but there are also many beginners who have done it, and there are also many friends who are not very familiar with it. As we mentioned earlier, there are also many friends who want to know how to turn on the microphone, and they also know how to turn on the microphone. It is also very likely that there are also many friends who want to know how to turn on the microphone, The editor also agrees very much, and of course, we have many friends who want to know how to open the microphone, and these friends also have many questions

Retour au blog