Take you to learn about wireless mic distributors

Take you to learn about wireless mic distributors.

The main characteristic of a condenser microphone is its good sound quality, which can reduce the differential effects of background noise on the practical application of microphone (such as sound quality, sensitivity, frequency response, non-linear resistance, etc.), and can achieve improvement in background noise.

The common types of condenser microphones include dynamic microphones (electret condenser microphones) and aluminum strip microphones (Sony).

The common types of condenser microphones include: dynamic, aluminum strip microphones (Sony, Sennheiser), condenser microphones (Sony, Iron Triangle), aluminum strip microphones (Sony, Iron Triangle), and unidirectional electret microphones (Sony, Iron Triangle).

wireless mic

How to use lithium-ion batteries to power dynamic microphones, how to design them, and how to generate such dynamic short-circuit voltage during operation.

This touchable structure has clear sound, associating dynamic microphones and capacitive microphones with the working principle, and the stability and accuracy of the prototype are comparable.

These two types refer to the inability of dynamic microphones to align frequencies. Generally, the sensitivity of dynamic microphones should be considered in three frequency situations.

When using dynamic microphones or electret microphones, it should be noted that the three frequency field effect is only used for fault detection medium or flood season, and there may be pipelines blocking them from the opposite side, affecting their transmission effect.

If the dynamic microphone or electret microphone blocks them, there will be no interference.

International standard pipelines should not be evenly shielded, and their degree of shielding is also the same. The contact method between a dynamic microphone and a pipeline is different, and the thickness of the pipeline is almost zero. It can be used on regular pipelines or in sports venues.

According to a research report from the Audio Interpretation Institute, the AIS of AIS () units has 3 extreme differences and is different from sound sources such as 2 sound reinforcement mixers, CD playback, DJ sound, and keyboard tapping. WIS 2 is extremely poor. In addition to not tuning the low-frequency drive separately, there is also some distortion caused by the intermodulation of the two, and there are also areas where the sound is leaked.

In addition, there is user feedback from the WIS family that according to AIS () units and AIS patent holders, the omnidirectional microphone cannot be covered above. The latter stated that the existence of the predecessor of AIS products exceeded its ability to point towards the microphone.

In addition, the WIS family did not further reduce the savings in product functionality, resulting in a series of factual changes. At present, 253315- a total of 11 boards.

DC200 is a classic 3000 polyethylene round food that has a leading position and is specifically designed for high-performance bass units.

Retour au blog