The best wireless mic supplier with the best technology is the talent who is the first to explore various professional knowledge in each microphone. We have a core team of professional audio equipment manufacturers and manufacturers, who have used KE 1-380 preamplifiers with electric misaligned frequencies and switch areas. Early preamplifiers separated phantom power supplies, achieved low impedance switching (IMD), and continuously improved the results, resulting in relative durability, low efficiency, and high output controllability of preamplifiers. Currently, it is also suitable for wireless mics with the same technology.
There are many components of wireless mics, and the specific decision depends on the following aspects: 1. The light on the button panel is large, and it will also turn red when it reaches yuan. When good lighting conditions are needed, more functions can be achieved: finding a suitable lamp for oneself, naming it L/R or similar, mainly used to obtain special environmental temperatures such as lighting and ground.
When you speak into the microphone, the sound from the earpiece comes out, which is very good, but some of the same microphones may have poor clarity of sound, so it is not possible to balance the directionality of the microphone. 2. Fix the microphone on the back of the microphone in the receiving direction, and at this moment, locate it near the front of the microphone, which is usually very good near the back of the microphone.
The microphone waist pack waist mounted transmitter can be used to build high-quality radio stations, recordings, games, radio stations, and many other places where you need to meet at the same time. Equipped with a PLL phase-locked loop frequency synthesis technology, it can prevent interference from distant or regional acoustic signals.
This type of microphone is hidden and can effectively prevent external interference and avoid interference from signals from other directions. In addition, the transmitter is equipped with a low noise microphone to isolate external interference from other wireless signals.
The microphone is fixed on the microphone pole, and the LEWITT microphone can directly pass audio signals through and receive them. The microphone is fixed at a fixed frequency to avoid non body and interference. There is an unbalanced audio distribution system that allows multiple transmitters to be used together.
The transmitter can only be sewn, disconnected, and cannot fail, and can only be powered by the system host