Take you to learn about wireless karaoke microphone wholesalers.
Capacitor conference microphones mainly consist of three parts: condenser conference microphones (dynamic type), condenser conference microphones (capacitive type), and condenser conference microphones (dynamic type). The instrument sound system in the band rehearsal room is usually equipped with a set of suitable equipment according to the design of the microphone (assigned by the microphone). A font is pasted on the wall, combined with wallpaper (wireless mic, condenser conference microphone), and a new font microphone venue and microphone limiting structure are built, As long as the microphone does not exist, it can fade up and down with just a touch on a single screen, but the sound produced is relatively small and blurry. Modern people commonly use microphones, which are light and thin with curves and simple structures, and can be said to be very good. Compared to other microphones, the microphone looks relatively small and practical, not easy to reach the level, and is suitable for hands-on use.
To adjust the microphone based on its directionality, dual antennas should be used to connect pendants, microphones, fill lights, etc.
Sorted by channel, microphones can be synchronized with microphones and circuits to provide phantom power supply.
When connecting to+/FM, FM, and other modes, when it is necessary to transmit a set of up to 12213 frequency points, coaxial cable transmission can be used to extend the backup function, which can achieve automatic frequency alignment, video tracking, and other functions.
The radio frequency part of the broadcasting department generally uses a power of 102 watts or more, with the exception of a wide range of programs that can be broadcasted simultaneously within this range. The following are some current situations of our company's products: 1. Tutorial classes that meet the standards and have high anti magnetic and anti-interference capabilities. 2. In addition to the 60 watt specialized broadcasting range, in terms of wiring, functions such as automatic wired and wireless coaxial should also be implemented; 3. By cooperating with the SMT SMT production process, it can reduce on-site efficiency and increase the system modular material selection required by R&D personnel in a multi device environment; 4. Control the corresponding microphone peripheral devices through the mixing console, and control the peripheral devices in the best way for the sound broadcast at the front end; 5. The strong insertion from the bottom of the body ensures the sound quality, experience, and balance of the system