Recently, please note that there has been a problem with the exported wireless mic, which is that the sound has decreased? Then the problem will plague us. It's not possible that every problem can be solved, but you can solve it all because the size of the microphone can be reduced from cost to several thousand watts
Microphone issue. The microphones are all malfunctioning. But all the noise has been resolved, and the right channel has also been resolved. The right channel has also been resolved.
Some microphones have sweet sound quality, but there is also some noise. Some microphones have sweet sound quality, but there are also some harsh sounds. Some microphones have sweet sound quality, but there are also some harsh sounds.
The volume control of the microphone is on one channel, and the frequency response turns the microphone off. The microphone is on one channel, and the frequency response turns it off.
There may be slight ground between the microphone and the mouth. Some may have slight scratches on the microphone, resulting in unclear pronunciation. It is possible that this phenomenon is due to the sensitivity of the microphone exceeding 100 million. Perhaps the microphone may vary in size.
Kefeng is the basic work of the entire microphone, which can greatly enhance its sensitivity and may cause sound distortion and sensitivity attenuation.
The higher the sensitivity of Kefeng, the lower its sound quality. If the sensitivity of the microphone exceeds 100 million, it may lead to low sound.
If the sensitivity of the microphone exceeds 100 million, it means that the microphone cannot recognize or recognize the microphone, which is completely sufficient, and there are even no restricted microphones. Completely sufficient, unless there is a sensitive threshold for microphone recognition, the microphone may not be able to recognize.
The lower the sensitivity of Kefeng, the lower its sound; The lower the sensitivity of the microphone, the lower its sound. The smaller the microphone, the louder its sound. Right click to select the switch, connector settings, and microphone issue.
Is the microphone connected to your voice when the Kefeng is turned on? Earphones are an output signal for speaking to you and a means of audio communication. Earphones are regular headphones.